Rascal Venture 3 Wheel Mobility Scooter RED RSC39

RSC39,RASCAL VENTURE,RED,3 WHEEL,12 AMP

• FDA CLASS II MEDICAL DEVICE: FDA Class II Medical Devices are designed to aid individuals with mobility impairments. Rascal units have been rigorously tested to the highest standards to ensure consumer safety and long-term satisfaction.
• Long lastinng range of up to 10 miles on a single charge. (3-Wheel)
• Top speed of up to 4 miles per hour
• Lightweight 12 AH SLA battery pack
• Front basket included
• Easily accessible charging port
• Modular design for serviceability
• Color-through shroud

  Model	Rascal Venture
  Model Number	RSC39 (3-Whee) RSC49 (4-Wheel)
  Front Tires	8"
  Rear Tires	8"
  Maximum Speed*	4 mph
  Ground Clearance	3- wheel 1.26" at motor
  Turning Radius**	3-wheel: 33"
  Overall Length**	3-wheel: 38.5"
  Overall Width of Base**	22.5"
  Seat-to-Deck Height Range	15.5 - 18"
  Seat Type	Moldable Plastic (17"x17")
  Weight Without Batteries	3-wheel: 76.5 lbs.
  Battery Weight	20 lbs.
  Battery Requirements	Two 12-volt, sealed lead-acid, non-spillable deep cycle size: 12 AH
  Maximum Range Per Charge*	3-wheel: Up to 10.1 miles at 200 lbs.	3-wheel: Up to 8.1 miles at 300 lbs.
  Battery Charger	Off-board, 2A
  Maximum Weight Capacity	300 lbs.
  Standard Body Colors	Red

   

  The information contained herein is correct at the time of publication; we reserve the right to alter specifications without prior notice.

  *Speed & range vary with user weight, terrain type, battery charge, battery condition and tire pressure.

  **Due to manufacturing tolerances and continued product improvement, this specification is subject to a variance of +/- 3%

  Meeting and Exceeding High Standards for your Peace of Mind.

  Your Pride product has undergone thorough product testing to ensure safety, durability and performance.

  Our power chairs, scooters and lift chairs are Food & Drug Administration (FDA) approved medical products that require specific testing prior to release for public use.

  The testing requirements accepted by the FDA were developed by the American National Standards Institute/Rehabilitation Engineering & Assistive Technology Society of North America (ANSI/RESNA).

  The tests are conducted in accordance with the requirements of the ANSI/RESNA Test Standards and complement an additional stringent testing regiment developed by Pride's Research & Development Team.

  All products have passed, and in many cases, exceeded test criteria set forth, assuring the high level of quality synonymous with Pride.

  Some of the items our testing criteria include are:

  • Product Stability & Brakes Effectiveness Tests
  • Fatigue & Impact Strength Verification Tests
  • Overall Product Performance Verification
  • Dimensional Requirement Compliance
  • Product Durability & Reliability Testing
  • Material Protective Coating Testing Verification
  • Misuse and Abuse Testing
  • Ergonomic Verification
  • Environmental Testing for Adverse Weather Operation Conditions
  • Electronic Systems Performance and Durability
  • Chemical and Bio-Contamination Analysis Testing for Toxicity Verification
  • Cal 117 Flammability Test Compliance for Seating Foam and Fabric Components
  • UL94VO Flammability Testing for Compliance of Plastic Components
  • Electromagnetic Compatibility (EMC)